Just got done setting everything up on my mill in mach3,just wondering how I save those settings that I have set for the motors and steps per inch? Any advise will be appreciated.Thanks Mike
Just got done setting everything up on my mill in mach3,just wondering how I save those settings that I have set for the motors and steps per inch? Any advise will be appreciated.Thanks Mike
I should say how do I back up the settings? Thanks Mike
Just save a copy of the file Mach3Mill.xml
Gerry
UCCNC 2017 Screenset
http://www.thecncwoodworker.com/2017.html
Mach3 2010 Screenset
http://www.thecncwoodworker.com/2010.html
JointCAM - CNC Dovetails & Box Joints
http://www.g-forcecnc.com/jointcam.html
(Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)
Copy it from your Mach3 folder and either burn it on a CD, or put it somewhere else. When you reinstall Mach3, just copy it back into the Mach3 folder. No need to create it, it's already there. It's the file that all your settings are stored in.
Gerry
UCCNC 2017 Screenset
http://www.thecncwoodworker.com/2017.html
Mach3 2010 Screenset
http://www.thecncwoodworker.com/2010.html
JointCAM - CNC Dovetails & Box Joints
http://www.g-forcecnc.com/jointcam.html
(Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)
Thanks ger21!!!