[oljeg]

can onyone help me with price for synrad co2 laser tube 200w rf with power supply.

Thanks

[MonoNeuron]

Hi oljeg,
A 100 watt Synrad laser costs $16,000USD so I would think a 200 watt one would be around $32K - $36K plus the 80 amp power supply which will add several hundreds of dollars to the cost.
Rich.

[kewlkiwi]

Just for the tube???

Wow - 'hate to think how much the whole machine is then...

Bob

[mery]

Hello,

did anyone gave laser tube (Sinrad model 48-1) on refill at lokal gas service?

What is the procedure - important informations to make proper refill?
I know it should be used CO2 gas. With how many bars (unit of pressure) should be filled? What installation - slip road is used?
Have an old GCC Laser Pro model L-12 (12 W) made in 1999.

Think this information would help lots of people.

Thanks

[Tweakie]

Mery,

If only it were that simple.

The Synrad 48-1 tube contains a mixture of gasses 5% CO2, 15% Nitrogen, 80% Helium and maybe others and it is in the tube at below atmospheric pressure.

Tweakie.

[zax15uk]

The local gas service can probably provide bottles of 'laser mix' gas for a flowing gas laser but re-filling a Synrad tube is a different matter.

The exact mix is proprietary but the base is as Tweakie mentioned, I would check with a local Synrad supplier or perhaps Litografa has a suggestion.

Zax.

[cinematic2]

You can not regas Synrad lasers without specific knowlege (exact mixture, gas pressure etc).
Regards