[Jung]

Hi,
I have a Fanuc 10M Roku Milling machine electrical diagram, that use DI/DO board. This board have M1/M2/M18/M19/M20 connector, but unfortunatly this machine use only M1/M2/M18 connector.

I see the signals as following:

M1:
01 19 X008.4 33 X008.3
02 20 X005.3 34 X008.7
03 21 X005.2 35 X008.1
04 22 X005.1 36 X008.0
05 X007.5 23 X005.0 37 X007.6
06 X005.7 24 X006.3 38 X005.5
07 X005.6 25 X006.7 39 X005.4
08 X006.7 26 X008.6 40 X006.5
09 X006.6 27 X008.5 41 X008.7
10 X006.4 28 42 X009.7
11 X006.1 29 24N 43 X009.6
12 X006.0 30 24N 44 X009.5
13 X007.7 31 24N 45 X009.4
14 X007.4 32 24N 46 X009.3
15 X007.3 47 X009.2
16 X007.2 48 X009.1
17 X007.1 49 X009.0
18 X007.0 50

M2:
01 G24N 19 Y001.5 33 Y002.7
02 G24N 20 Y001.4 34 Y002.6
03 G24N 21 Y001.3 35 Y002.5
04 G24N 22 Y001.2 36 Y002.4
05 Y000.7 23 Y001.1 37 Y002.3
06 Y000.6 24 Y001.0 38 Y002.2
07 Y000.5 25 Y000.0 39 Y002.1
08 Y000.4 26 Y000.1 40 Y002.0
09 Y001.7 27 Y000.2 41 Y000.3
10 Y001.6 28 G24N 42 Y004.7
11 Y003.7 29 24N 43 Y004.6
12 Y003.6 30 24N 44 Y004.5
13 Y003.5 31 24N 45 Y004.4
14 Y003.4 32 24N 46 Y004.3
15 Y003.3 47 Y004.2
16 Y003.2 48 Y004.1
17 Y003.1 49 Y004.0
18 Y003.0 50

M18:
01 G24N 19 X000.1 33 X000.0
02 G24N 20 X000.3 34 X000.2
03 G24N 21 X000.6 35 X000.4
04 G24N 22 X001.1 36 X000.7
05 X000.5 23 X001.4 37 X001.2
06 X001.0 24 X001.7 38 X001.5
07 X001.3 25 X002.2 39 X002.0
08 X001.6 26 X002.5 40 X002.3
09 X002.1 27 X003.0 41 X002.6
10 X002.4 28 G24N 42 X003.1
11 X002.7 29 24N 43 X003.3
12 X003.2 30 24N 44 X003.5
13 X003.4 31 24N 45 X003.7
14 X003.6 32 24N 46 X004.1
15 X004.0 47 X004.3
16 X004.2 48 X004.5
17 X004.4 49 X004.7
18 X004.6 50

I still missed M19 and M20.

Does any one who have connection manual or electric diagram of machine use this Fanuc 10 board, please help me address the signals on M19/M20 connector.

Thanks

[Al_The_Man]

Here is PDF
Al.

[Jung]

That's what I need.
Thank you very much