Dear All,
can any one help me to solve that alarm 408 servo alarm "serial not RDY", i think the serial spindle parameters no correct, i need the motor code for the spindle motor model αP18, i'm not sure if it is right.
regards,
Sting
Results 1 to 3 of 3
Threaded View
-
01-01-2008, 04:03 PM #1
Member
- Join Date
- Feb 2015
- Posts
- 96
alarm 408 servo alarm "serial not RDY", αP18 fanuc mtor code
Reply With QuoteSimilar Threads
-
Fanuc O-MC Alarm 405 "Z axis wrong (ZRN)"
By JSaindon in forum FanucReplies: 2Last Post: 09-19-2007, 04:22 PM -
Now I get a "197 C-AXIS COMMANDED IN SPINDLE MODE" ALARM
By theemudracer in forum FanucReplies: 14Last Post: 01-08-2007, 06:10 AM -
Macro alarm "009 ILLEGAL ADDRESS INPUT"
By theemudracer in forum FanucReplies: 7Last Post: 12-26-2006, 04:57 PM -
Fanuc 18t Turret alarm "1110"
By senna95 in forum FanucReplies: 0Last Post: 10-18-2006, 05:03 PM -
ALARM!!! "Commanded X Axis move too far / Positive"
By aimeahz in forum Bridgeport / Hardinge MillsReplies: 6Last Post: 04-20-2006, 11:51 PM
Posting Permissions
