Hello, I am new to this group and have a question. I currently have a CNC router with stepper motors in an open loop configuration. I would like to add encoders and switch to a closed loop configuration. What type of controller is recommended for this? I am willing to build my own if plans/schematics are available.
Thanks in advance,
Ed
Results 1 to 12 of 12
Threaded View
-
01-02-2008, 06:41 PM #1
Registered
- Join Date
- Feb 2007
- Posts
- 6
Open Loop to Closed Loop Stepper Conversion
Reply With QuoteSimilar Threads
-
CNC conversion typically open loop or closed loop?
By foobar42 in forum Benchtop MachinesReplies: 8Last Post: 10-30-2009, 01:21 AM -
question on closed loop vs open loop (servo systems)
By boonie in forum Servo Motors / DrivesReplies: 20Last Post: 11-09-2007, 07:30 PM -
Closed loop vs. open loop
By pelesl in forum Benchtop MachinesReplies: 10Last Post: 04-06-2007, 10:56 PM -
Lathe conversion - open loop vs closed loop
By bhowden in forum Uncategorised MetalWorking MachinesReplies: 7Last Post: 03-21-2006, 10:56 PM -
Closed loop....open loop?
By DAB_Design in forum CNC Machine Related ElectronicsReplies: 10Last Post: 06-26-2004, 10:02 PM
Posting Permissions
