[chimpera]

I took the liberty of creating a mailing list. I set it up so anyone can join but the contents are private so we can be a little more free with personal information and such. If you would like to join go to

http://groups.google.com/group/dallascnc

thanks, Ben

[chimpera]

I also created a calendar so we can keep each other informed of events in the area. Anyone who would like to help keep the calendar up to date please let me know.

http://www.google.com/calendar/embed...Z29vZ2xlLmNvbQ

[El_Matarife]

Friday through Saturday this week there's going to be a woodworking show at Big Town Mall in Mesquite. The North Texas CNC users group will be there, along with several other local hobbyist groups.
http://cms.thewoodworkingshows.com/c...0/Default.aspx

Bob Campbell needs volunteers to help run the table, so email him if you can help. I'm going to try to work a shift myself.

[osphoto]

Hi All!

With December here and my personal goal of cutting something on my machine by the end of November, I'm here to report, I've since moved my goal.

I do have the table up and running (monitor replacement and a new APC UPS unit required).

I've had to move my focus to finishing out my work area, ie, insulation going up, ceiling along with shop lights, etc. One must have light along with an environmental temperature to work in.

I like the idea of the mailing list! Great job!

Shall we setup a time to meet up in January?

For those new people in the area, I'd be happy to work with software and such with you. Join the mailing list, (a few post up) and hit me up. "osphoto"

[Big-tex]

Here is more info on North Texas CNC Group
you can find meetings etc....

http://groups.yahoo.com/group/ntcncug/
Web Site
http://www.ntcncug.com/

[Mkroe]

Hi All!

With December here and my personal goal of cutting something on my machine by the end of November, I'm here to report, I've since moved my goal.

I do have the table up and running (monitor replacement and a new APC UPS unit required).

I've had to move my focus to finishing out my work area, ie, insulation going up, ceiling along with shop lights, etc. One must have light along with an environmental temperature to work in.

I like the idea of the mailing list! Great job!

Shall we setup a time to meet up in January?

For those new people in the area, I'd be happy to work with software and such with you. Join the mailing list, (a few post up) and hit me up. "osphoto"

PM sent Sign me up
MK

[El_Matarife]

I'd be up for doing a lunch or something this weekend if people were interested. I'm assuming somewhere slightly north of 635 would be best. I know Twisted Root Burger Co opened up a new location at 75 and Campbell which could be pretty good.

http://www.twistedrootburgerco.com/menu.html

http://maps.google.com/maps?f=q&sour...8&z=17&iwloc=A

I'd suggest 2 or 3 PM on Saturday when it slows down a bit, the place is usually packed from what I understand. The Deep Ellum location is certainly pretty busy around the clock.

Other suggestions: Freebird's in Addison is pretty central for everyone north and south. I'm assuming we want to be within a few blocks of 75 or the Tollway for convenience?

I'll go ahead and send this post to the Google Groups mailing list as well.

[Big-tex]

I'd be up for doing a lunch or something this weekend if people were interested. I'm assuming somewhere slightly north of 635 would be best. I know Twisted Root Burger Co opened up a new location at 75 and Campbell which could be pretty good.

http://www.twistedrootburgerco.com/menu.html

http://maps.google.com/maps?f=q&sour...8&z=17&iwloc=A

I'd suggest 2 or 3 PM on Saturday when it slows down

Sounds good to me

[chimpera]

I'm in