Can someone tell me if theres a way to generate a knurling toolpath in Lathe V9? If not what would be the best way to knurl on a CNC? Do you need an expensive CNC knurling tool? Or will a simple self-centering knurl holder work?
Thread: Knurling with V9
Results 1 to 2 of 2
-
01-05-2008, 02:51 AM #1
Registered
- Join Date
- Jul 2005
- Posts
- 13
Knurling with V9
-
01-05-2008, 03:31 AM #2
Registered
- Join Date
- Sep 2004
- Posts
- 145
I've done it a couple of times using a turn operation by selecting a turn tool and then editing the speed, feed and tool description. Down and dirty.
Worked for meInsanity "doing the same thing and expecting a different result"
Mark
www.mcoates.com
Reply With QuoteSimilar Threads
-
Knurling
By gr8life in forum Uncategorised MetalWorking MachinesReplies: 1Last Post: 10-31-2007, 11:02 AM -
knurling
By SAWMAN in forum MetalWork DiscussionReplies: 14Last Post: 03-17-2007, 03:50 AM -
Knurling
By SPEEDRE in forum MetalWork DiscussionReplies: 4Last Post: 10-03-2006, 12:04 PM -
Knurling
By larry53 in forum MetalWork DiscussionReplies: 0Last Post: 08-05-2006, 01:29 AM -
Knurling ?
By Ken_Shea in forum MetalWork DiscussionReplies: 13Last Post: 02-23-2004, 05:17 PM
Posting Permissions
