Dpuch,I appreciate your help.. thanks..but These were not the parameters for my machine.
Changed DAC chips/NVRAM chip with originals
Got the original parameters from a Friend F1-53 and the Spindle worked Immediatly,
Seems that the motor and the spindle drive unit have a Unique set of parameters, this adds to
that the first parameters have to be the same as how the unit communicated with the control.
Such as the ready signal etc..
Im so happy that I got this machine running, If anyone has a similar problem with this machine..send me a message, I will be glad to help you!
Learned a lot this these days, especially when you Input the wrong parameters and the Spindle starts to accelerate non stop!
, Then you think hey..I´ll turn off the control.
and this doesnt do jack because the Spindle drive is still on, and The spindle keeps on accelerating.
Then you know that something is wrong!
Thanks everyone!