586,103 active members*
3,866 visitors online*
Register for free
Login
IndustryArena Forum > MetalWorking > MetalWork Discussion > Need bar stock with a 1mm hole going through the length of it?

Thread: Need bar stock with a 1mm hole going through the length of it?

Results 1 to 4 of 4
  1. 01-20-2008, 10:34 PM #1
    squale
    squale is offline Registered
    Join Date
    May 2007
    Posts
    320

    Need bar stock with a 1mm hole going through the length of it?

    What is this type of bar stock called that has a hole running through the center of it along it's length? I need about 1" OD 316ss rod with about a 1mm hole running through the length of it..

    is it expensive?
    Reply With Quote Reply With Quote
  2. 01-21-2008, 08:28 PM #2
    RICHARD ZASTROW
    RICHARD ZASTROW is offline Registered
    Join Date
    Mar 2006
    Posts
    2712
    I don't know of any hollow bar or mechanical tubing or other type that has a 1mm hole thru its length. Maybe somebody in the hypodermic needle business? How long is the workpiece/hole? I've seen some relatively deep holes sunk with hollow tube EDM electrodes. .010"/.25mm dia. self flushing tubes resulted in .013" dia. holes about 1" deep. Hope that helps.

    Dick Z
    DZASTR
    Reply With Quote Reply With Quote
  3. 01-21-2008, 08:35 PM #3
    squale
    squale is offline Registered
    Join Date
    May 2007
    Posts
    320
    I need to go about 6 inches long, .145" OD of the workpiece and a hole that is 1mm diameter going through the center of the workpiece end to end..
    Reply With Quote Reply With Quote
  4. 02-18-2008, 03:47 PM #4
    cncswiss1
    cncswiss1 is offline Registered
    Join Date
    Feb 2008
    Posts
    24
    cannulated stock, forecreau usa has it (I may have spelled that wrong)
    Reply With Quote Reply With Quote
« Previous Thread | Next Thread »

Similar Threads

  1. X2 R8 Drawbar length???
    By maxboostbusa in forum Benchtop Machines
    Replies: 1
    Last Post: 10-05-2007, 04:09 AM
  2. cut to length
    By chathorne in forum Uncategorised MetalWorking Machines
    Replies: 0
    Last Post: 04-25-2007, 04:47 PM
  3. Max length of linear rod?
    By MrBean in forum DIY CNC Router Table Machines
    Replies: 3
    Last Post: 03-06-2005, 03:47 AM
  4. head stock and tail stock chucks
    By mocnc in forum DIY CNC Router Table Machines
    Replies: 3
    Last Post: 10-20-2004, 03:16 AM
  5. Linear rod+max length?
    By smythe in forum DIY CNC Router Table Machines
    Replies: 1
    Last Post: 08-31-2004, 02:19 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules