Hello new to emc but refuse to give up. have found a number of problems in the setup of my machine and curious who do you send bug reports ?
one big problem is stepconfigs handling of pulley ratios.

I have been in the mechanical field for 20+ years and stepconfigs ratios are backwards aswell as flawed.

example my z has a ratio of 19 motor turns to 1 srew turn, the screw would be a 1" lead but this dosn't ork right.

I can make the system work both ways with different results.

also ratios as i know them are 1;1, 2:1 etc.. as the screens tell you but
my setup wants them entered backward 1 motor too 2 screw. when its actually 2 motor to 1 screw.

curious if anyone has noticed this or am i missing something, have been burning the candle at both ends some nights.

Gads