[Bigbill]

I have a Daewoo Puma 230M lathe with a Fanuc 21i-model B control. I would like to save my nc files to a PC-CARD. I did it following the instructions I have but what I got on the card was ONE FILE with all the programs together as one program. What I need is all of my nc files saved as individual files (as they are on the lathe)
If anyone knows how to do this could you give me a step by step lesson.

Thanks
Bigbill

[dcoupar]

Bigbill,

I think that you got what you're going to get. Fanuc does the same thing when you punch all programs whether you use RS-232 or the Memory Card. Some DNC programs (at least I know Predator DNC does) will automatically split them into individual files, but Fanuc just sends out one big file.

[chucker]

We also have 2 Daewoos with a Fanuc and you can download them one at a time I will have look at are machine tomorow to tell what keys and in what order to push them I use a card the same way. I will post it as soon as I can

[M-man]

just set para 20 to 4 and press punch to save the current program to the card.