We have a HMC with Fanuc 160i MA which loaded with Window NT 4.0, but the hard drive was bad now, we need reload window, we have window CD. Please help if you know how to load the window on a new Hard drive.
Thanks.
Results 1 to 3 of 3
-
02-02-2008, 05:53 PM #1
Registered
- Join Date
- Apr 2006
- Posts
- 1
How to reload window NT on Fanuc 160I Help!
-
02-03-2008, 06:06 AM #2
Member
- Join Date
- Feb 2007
- Posts
- 966
Maybe, Format and prep the new harddrive in a PC, the put it back in the controller. Does it have a cd rom ?
-
02-03-2008, 03:45 PM #3
Registered
- Join Date
- Aug 2005
- Posts
- 578
windows nt reload
Depending on how old the PC board is in your control.... you may only get 512 meg out of the drive. Also, one thing to note is that if you dont have a 4 gig drive you will have to partition the drive into at least 2 partitions one being 4 gig. This will be the partition that NT will install on. NT 4.0 was restrictive in that way.Those extra gigs can still be accessed but as a separate partition.
Reply With QuoteSimilar Threads
-
reload parameters in fanuc 0m
By samu in forum FanucReplies: 3Last Post: 11-29-2009, 05:04 PM -
OM loss all parameters. How to reload?
By teal854t in forum FanucReplies: 4Last Post: 06-07-2007, 02:49 AM -
Reload executive software
By inertialabs in forum Bridgeport / Hardinge MillsReplies: 3Last Post: 03-10-2007, 06:20 AM -
How to reload a ballnut?
By bgolash in forum DIY CNC Router Table MachinesReplies: 1Last Post: 04-07-2005, 04:49 PM -
Jogging window...
By murphy625 in forum CamSoft ProductsReplies: 10Last Post: 04-06-2005, 12:01 AM
Posting Permissions
