Hi,
We just got a HAAS TL-4 Lathe. I have been doing the programming for our Mills for about five years now, but this is the first lathe I will have programmed. At this point my main concern is how to use the tool nose radius compensation. I would like to have the Program do all the compensating for the radius on the tool just as with programming using centerline programming on the mills(no need to but a tool diameter or radius in). I use FeatureCam for most of my programming but I also have MasterCam and SurfCam. I can see many obsticles because of it being a toolroom lathe but I will start with this one.
Speeeeeeeeeeeeeeed