SIRS,

Our company is PMB INC. Located in Poplar Bluff, MO.
We are having problems with a hardinge conquest st-25 with a GE fanuc series ot controller. Our initial problem was in the B axis servo. We replaced the encoder and servo unit. while attempting to do a B axis home setup we encounterd problems with not being able to move the axis. After checking alarm codes we discoverd a new alarm. #447 digital servo system adnormal. After numerous trys at fixing this problem WE ARE AT A TOLAL LOSS. any recomendations? HELP PLEASE.

SINCERLY
STEVE COSBY. PMB.