[neilthib]

I'm trying to scale a logo that I made in dolphin cad. I select the logo then press cut then paste then right click and change the scale. It changes the scale on everything but the acres and radius. I cant figure out why it is doing this. It use to work fine. Has anyone ever had this problem?

[andre-dolphin]

Can you send me the drawing and I'll take a look.

[email protected]

[neilthib]

Here is the File.

[andre-dolphin]

It might be sopmething to do with the data in the original DXF file.

You are using V10-0-1002, I was unable to open the drawing in Vs 1006 - it reported bad data.

I was able to open it in V11 and scale the part OK.

As an alternative to using Cut n Paste, try collecting the part as a symbol and then placing that into the drawing with a scale factor.

Have a look at the Help files for info about symbols.

[neilthib]

Andre,

The symbol option worked fine to scale my drawing. I use to scale all my drawings using the copy and paste. I do not know why the copy and paste method is not working anymore.
Thanks for all your help.