[tkea]

Hi, i have a big problem. I bought lathe tornado 200 with no backup baterry. I upload all parameters, zeroes, but i'm not sure with params 900 - 940, i copied it from similar machine, which has a barfeeder.. When type in MDI T1 M6, CycleStart button still lighting, but response of machine is NOTHING. The same, when i try rotating turret by hand. When i type S200 M3, the spindle still stop and on spindle inverter LED's lighting "--".
Thanks

[GPena]

If this is a lathe, for the tool change you need to write T0101; M06 is for mach. centers.

GP.

[Dave1]

Did you put the diagnostic or "pc" parameters back in? If not it won't run like it should (ask me how I know that!) They are numbers 300-549 on the diagnostic page.
Parameters 900-940 are the ones that tell the control how many options and basic functions you get.
The spindle won't start unless the chuck is clamped.
Dave

[tkea]

Did you put the diagnostic or "pc" parameters back in? If not it won't run like it should (ask me how I know that!) They are numbers 300-549 on the diagnostic page.
Parameters 900-940 are the ones that tell the control how many options and basic functions you get.
The spindle won't start unless the chuck is clamped.
Dave

And where i get this Diag params?

[Dave1]

You have to find a lathe just like yours or get a hold of a dealer that sells or sold tornado lathes. The diag parameters control all the switches that run the lathe. If you can save to a pc that would tell you if they are there. Put the control in edit, push the diag/parameter button, might have to push it twice, it should say diagnostic in the upper right hand corner of the screen, then push output and it will send them to the pc. Look at the file, the number you will see are 10300-10549. If they come up with all zero's then they are missing.
I just went through this on my Takisawa with a Fanuc 0T, I was able to get them from the Takisawa dealer, thay had them on file thank goodness.
Good luck,
Dave

[Dave1]

I would email this company, maybe they have them or can send you in the right direction.
http://www.machinery.co.uk/directory...-Lathe-Co.aspx

Dave

[rrbmachining]

I have a tornado 200 and if you supply an email address i will see if i can send you a full set of parameters when i get to the shop in the morning if thats any use to you

regards
Richard
RRb Machining Services ltd

[tushar]

can you pl help me tornado 200 parameters & dgn
thanks in advance
tushar

[lesr]

Don't know if this was resolved, I'm ex 600 Lathes if anyone needs help
Les Robbins CNC Services - Index

[Kamal B]

Did you get the Parameter & dgn. DO you have the operator manual.. I am stuck with a Torado 200 and no one is ready to take up maintainence due to unavailability of manuals.

if you could pls hlp.

Thanks
Kamal

[lesr]

Kamal

what is the machine serial number ?

regards

Les Robbins

EditComm - CNC communication software - Les Robbins CNC Services