My tree 1050 will stall in high speed range during a tool change with tools in the pockets but will run all day long with no tools in it.any ideas where to look would be apprecited.
Bob
Results 1 to 3 of 3
-
02-15-2008, 06:58 PM #1
Registered
- Join Date
- Feb 2008
- Posts
- 12
tool change stalls in high speed range
-
02-17-2008, 11:42 PM #2
Registered
- Join Date
- Jan 2008
- Posts
- 136
check spindle orientation position is correct, ie that the motor is not fighting against the driving dogs.
-
02-20-2008, 12:52 PM #3
Registered
- Join Date
- Feb 2008
- Posts
- 12
thanks for the post,the orient position is right,works all day long in low speed but not in high gear with a tool in it.
Reply With QuoteSimilar Threads
-
High speed spindle... how high?
By jonesja2 in forum Uncategorised MetalWorking MachinesReplies: 1Last Post: 10-06-2015, 04:37 PM -
How to change Tool change position(About MAZATROL T1 control)
By liushuixingyun in forum Mazak, Mitsubishi, MazatrolReplies: 6Last Post: 01-07-2014, 01:33 AM -
Spindle speed range or lack of it!
By creep_pea in forum Bridgeport / Hardinge MillsReplies: 7Last Post: 10-04-2006, 10:42 PM -
Video of new High Speed Toolpaths 500IPM in tool steel!
By Alex_Cole in forum MastercamReplies: 15Last Post: 08-10-2006, 03:13 AM -
Speed range for VFD and three phase motor
By RotarySMP in forum CNC Machine Related ElectronicsReplies: 7Last Post: 04-20-2005, 08:05 PM
Posting Permissions
