587,036 active members*
3,073 visitors online*
Register for free
Login

Thread: kmb-1

Results 1 to 3 of 3
  1. 02-15-2008, 10:17 PM #1
    MTMW
    MTMW is offline Registered
    Join Date
    Jun 2007
    Posts
    4

    kmb-1

    I just finished wiring a 7 1/2 horse rotary phase converter to a kmb-1
    the servos come on, but when I try to calibrate the axis or tool cal
    I get emergency stop motion error. I have a air leak in the back of the machine that I am fixing now. any other suggestions if this dosen't solve my problem? thanks MTMW
    Reply With Quote Reply With Quote
  2. 02-17-2008, 02:34 AM #2
    Jim Caudill
    Jim Caudill is offline Registered
    Join Date
    Sep 2005
    Posts
    17
    I would check the servo wiring connectors. I think I posted previously about my expensive lesson regarding faulty connections.
    Reply With Quote Reply With Quote
  3. 02-18-2008, 08:38 PM #3
    MTMW
    MTMW is offline Registered
    Join Date
    Jun 2007
    Posts
    4
    Jim thanks for your reply. I fixed the air leak. I said that the servos were on but the are not. I checked connections turned the ribbion cable 180 with know luck. I have a freind coming over this saturday to take a look at it. Thanks agian Charlie
    Reply With Quote Reply With Quote
« Previous Thread | Next Thread »

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules