This seemed easier and will hopefully take care of others who missed out on some of the days.
cheers,
Ian
This seemed easier and will hopefully take care of others who missed out on some of the days.
cheers,
Ian
It's rumoured that everytime someone buys a TB6560 based board, an engineer cries!
how can i change .crv to .dxf ?
can anybody help me...
you find here a nice collection of free dxf Files
http://www.dxf-downloads.de
in the trial version, you can not export anything. Too bad.Could it make one for me and upload the dxf?
greeting
you find here a nice collection of free dxf Files
http://www.dxf-downloads.de
Hello all,
Just went to the machine to cut out a 3D Horse puzzle and the router would not come on. Gave the armature a little push and it fired up, but with some sparking from the brushes. Looks like I need to replace them. Anyone here have a suggestion on who to buy them from?
Thanks in advance,
Joe
Try SEARS ---- http://www.searspartsdirect.com/part...blt=11&shdMod=
This should get you to the order page. They only cost $8.45 a pair.
Larry
Larry,
Thanks for the link. I bought to sets from ereplacementparts.com for $5.30 a set. I also got a 1/2 inch collet.
Thanks again,
Joe
Does anyone know where I can find dxf's of the little metal tags that go on trophies?
Specifically I need one that looks like a badge, I will take a pic when my camera battery finishes charging.
Thanks
Thank You.
thank you very much Larry.
This is what I'm looking for.
Thank You.
Does anyone have the assembly instructions for the Angelfish puzzle?
I have attached an image below.
Thanks,
joe
Make CNC Product detail
$4.50 not to much for a great puzzle
ARGGHHH, I shoudl have seen it. I have bought a few puzzle vectors from them. Thanks for pointing it out. :-)
Joe
Thanks Larry, I should be able to work with these
Thank You.
I feel that the forum is no longer flat or provide templates for the preparation of 3D wooden puzzles, which enriched him at first, I hope you continue to provide this type of work and sharing the background so that everyone can do
deleted by request
HI:violin:
With all due respects to Paul and Julie Campbell of MakeCNC who are doing a fantastic job with creating works for their business I believe they are overlooking the fact that:
"This is a forum for sharing CNC information, help and associated material"
What has become apparent is that Paul and Julie have infiltrated this forum for free business advertising which actually contravenes the forum rules!
If we all start using this forum and others to advertise our business, goods and services etc then we would be destroying the purpose of providing FREE HELP and associated material specific to the forums.
Yes I have purchased some of Paul and Julies models several years ago before they infiltrated this forum and I will continue to purchase their models into the future but they do have a business Web Site and should not be using this forum or others for the purpose of free advertising.
Nobody will ever object to the odd free offering but extravagant lengthy advertising and marketing is actually an abuse of forum rules.
Interesting to see other forum users opinions on this subject ?