[Jay C]

For me, the limit is the dimension of my machine. I've used 1/8" and 3/8" ply with success. The worst for cutting is hardboard but after cleanup it's not too bad I guess.

[z-pilot]

hello everyone... i was wondering, is this thread dead? no more exelent files to share?

[landdesign]

not dead. just idle for a bit. things here seemed to come and go in sperts.

Erik

[gosha]

not dead i hope. here is new dino, but i dont have dxf of him yet

[piletjim]

the cobra that wakes up

[gosha]

here some new from bc.bones

[bigz1]

I have only just managed to get my CNC working after moving house.

But I have to get this Liopleurodon designed for my 3 year old's birthday in a few weeks time. Plus the train finished for his friends birthday.

[smartyarty53]

Hi Bigz1
Good to see you back on line - Hope your move went ok - I like the project you are doing at the moment. The Liopleurodon. Have you got your Machiney up and running ??

Regards Smartyarty53 - South Australia

[MrWild]

Square gears.

As a kid one of the coolest exhibit for me at Chicago's Science and Industry museum was the mechanical motion displays. Back ad forth, up and down, around and around, and SQUARE GEARS??!!! Impossible, gears are round, but turn the crank and these square gears mesh and turn.

Anyone have a dxf?

[landdesign]

I cut these with my grandson for a show an tell... seemed to be a big hit.

Erik

Square gears.

As a kid one of the coolest exhibit for me at Chicago's Science and Industry museum was the mechanical motion displays. Back ad forth, up and down, around and around, and SQUARE GEARS??!!! Impossible, gears are round, but turn the crank and these square gears mesh and turn.

Anyone have a dxf?

[el_tony33]

Hello everybody:wave:

thanks for sharing all this pieces of art,

It was very helpful to me and very special too, is very enjoyable to keep cutting this kind of 3D puzzles!!

and the most important, the children love it! jeje

There is a RAPTOR that I made of high density MDF sold in Walmart, is almost 1.2 m wide x 0.8 m high

The material in walmart measures 30 x 40 cms and is 0.303" thick, and as a note.... is very cheap! (is in the part of notebooks, paper and that kind of stuff)

I cut the dino it in my DIY cnc machine made from scrap, her name is "LULU", and she has 30 x 40 cms of cutting area, I love the way it works!

to make this dino it took 3 sheets of MDF bought in walmart

thanks to all, and please revive this thread!! :rainfro:

Regards from MEXICO!

Tony

P.D. (sorry for the bad quality of pictures jeje)

[smartyarty53]

Hi All
Seems that all has been very quiet for a while so I thought I would try and get the ball rolling. Here is a file of a "Cessna 172" Plane hope you like it.

Regards
smartyarty 53 - South Australia (The Land Down Under!!)

[smartyarty53]

Hi All
Here's one you might like to try - The "Angel Fish"
Post some photo's once assembled

Regards
smartyarty53 - South Australia

[jcoats]

Thanks smartyarty53!

[adam_m]

smartyarty53, I get errors "drawings made incompatible version" what are you using?

Thanks,

[smartyarty53]

Hi Adam
I am using Acad 2007 If you are having problems you can download a program called "Progicad" it is free, - and is a full working version

Regards
smartyarty53

[smartyarty53]

Hi Again
Here is another file I thought you may like.
Let me know if you like this sort of thing !!

[adam_m]

Hi Adam
I am using Acad 2007 If you are having problems you can download a program called "Progicad" it is free, - and is a full working version

Regards
smartyarty53

Thanks,

[Jayson]

Hi Tony,

I think one of your raptors relations is over here in Australia.




Jayson.

[thelordseba]

Hello beautiful people:
Here I upload the dxf of Spinosaurus. Hope you find it useful.

smartyarty53:
Thank you very much for uploading the angel fish and the Cessna (this last show I can not believe that the file is corrupted. Could you reuploaded).
Since already many thanks.

Another little thing:
Anyone have the brachiosaurus dxf?

Spinosaurus: http://www.megaupload.com/?d=2PU0REQ1

Soon I'll upload the dxf of Parasaurolophus.