586,070 active members*
3,440 visitors online*
Register for free
Login
IndustryArena Forum > CAM Software > Mastercam > Incremental Z Depths In Drilling

Thread: Incremental Z Depths In Drilling

Results 1 to 6 of 6
  1. 05-05-2003, 02:19 AM #1
    Litnin
    Litnin is offline Registered
    Join Date
    May 2003
    Posts
    2

    Incremental Z Depths In Drilling

    I've been trying to get my post (mastercam) to output incremental z depths in drilling cycles, but I can't seem to manage it.
    The z depth has to be an inc. value from the R plane.
    The control is a Hidenhien TNC430 iso. Which requires the z depth to be incremental.
    Any help would be greatly appreciated.

    Thnx.

    Litnin.
    Reply With Quote Reply With Quote
  2. 05-05-2003, 07:38 AM #2
    DavidB Guest
    are you posting in iso or heid convaersational?
    Reply With Quote Reply With Quote
  3. 05-05-2003, 07:41 AM #3
    hardmill
    hardmill is offline Registered
    Join Date
    Mar 2003
    Posts
    499

    Hey litnin

    did you try cadcam's sugg. from the other board?
    Reply With Quote Reply With Quote
  4. 05-05-2003, 07:45 AM #4
    DavidB Guest
    sorry after reading your post properly your posting in iso.
    In m\c check top of stock to increamental,and drill deepths to increamental.Your geometry for the drilling positions will have to be drawn at the different z levels.
    Reply With Quote Reply With Quote
  5. 05-05-2003, 10:21 PM #5
    Litnin
    Litnin is offline Registered
    Join Date
    May 2003
    Posts
    2
    Thnx. I'll get it a try.
    I'll give Cadcam's one a try too.

    Litnin
    Reply With Quote Reply With Quote
  6. 03-01-2012, 04:28 PM #6
    matesjiri
    matesjiri is offline Registered
    Join Date
    Mar 2012
    Posts
    0
    .
    Reply With Quote Reply With Quote
« Previous Thread | Next Thread »

Similar Threads

  1. CNC Router milling / drilling experience where I need help
    By kaleem1 in forum MetalWork Discussion
    Replies: 0
    Last Post: 10-06-2004, 07:17 PM
  2. Excellon drilling in Mach2?
    By Rhodan in forum Mach Software (ArtSoft software)
    Replies: 3
    Last Post: 04-27-2004, 07:42 PM
  3. Drilling Macro
    By mandrew35 in forum Uncategorised CAM Discussion
    Replies: 14
    Last Post: 07-07-2003, 08:58 PM
  4. Programming 5-axis drilling
    By Dan B in forum Uncategorised CAM Discussion
    Replies: 2
    Last Post: 04-28-2003, 11:46 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules