[Michael Esch]

Anyone have an instruction manual or copy of a manual, for a Daewoo PUMA-6 Lathe ????

I really Need one.

Thanks

[MMTechi]

Did you ever locate manuals? I have a service manual.

I too have picked up and older Puma 6 with a Fanuc 10T control. The manual have much for programming samples and is a little vague as too what menu screens i should be looking at for differnt modes, which is what I am looking for, or better yet if I could talk to someone that can walk me through a few simple steps to make sure the lathe works.

I have it all powered up and can home in the axis and initiate the spindle and turret index in manual mode, but then I am stuck.

I am not familiar with this control and haven't been able too get a program to run or accept mdi as a quick check to make sure it functions. I don't know if its me doing something wrong or if the control isn't working.

If you have gotten yours up and running, I would be interested in talking with you if you don't mind.

Bob Flores
231-632-6669
[email protected]

[dcoupar]

Do you have a Fanuc or Mitsubishi control?

[MMTechi]

dcoupar Do you have a Fanuc or Mitsubishi control?

It is a Puma 6 with a Fanuc 10T control