Anyone have an instruction manual or copy of a manual, for a Daewoo PUMA-6 Lathe ????
I really Need one.
Thanks
Anyone have an instruction manual or copy of a manual, for a Daewoo PUMA-6 Lathe ????
I really Need one.
Thanks
Did you ever locate manuals? I have a service manual.
I too have picked up and older Puma 6 with a Fanuc 10T control. The manual have much for programming samples and is a little vague as too what menu screens i should be looking at for differnt modes, which is what I am looking for, or better yet if I could talk to someone that can walk me through a few simple steps to make sure the lathe works.
I have it all powered up and can home in the axis and initiate the spindle and turret index in manual mode, but then I am stuck.
I am not familiar with this control and haven't been able too get a program to run or accept mdi as a quick check to make sure it functions. I don't know if its me doing something wrong or if the control isn't working.
If you have gotten yours up and running, I would be interested in talking with you if you don't mind.
Bob Flores
231-632-6669
[email protected]
Do you have a Fanuc or Mitsubishi control?
dcoupar Do you have a Fanuc or Mitsubishi control?
It is a Puma 6 with a Fanuc 10T control