Greetings!
I've never done an RFQ before, so forgive me if i'm not complete in all my information. I have a series of pattern disks that I need cut out off 6061 Aluminum, .25" thick. I could provide the aluminum precut into 4" x 4" squares, or you can provide them. Please specify in the quote what the costs with be with or without me providing the aluminum (it is preferable that I don't have to provide the aluminum.)
So far, there are 12 disks in the set. I have attached a dxf of one of the disks to give an idea of dimensions and complexity. There are 3 holes in addition to the outer boundary, 1 large center hole and 2 smaller holes.
Initially, I would probably want 3 of each of the 12 pattern disks. Future followup orders would likely be 3 to 6 of each of the 12 pattern disks.
Please send any RFQ's to [email protected].
Thanks in advance,
Wade