[rrbird76]

Hello all. This is my first post and I really need help. One of our cnc lathes is a 1985 Takisawa lathe with a fanuc 3 T controller. Our monitor went out and I think iwe must have got a surge, either from the storms that just came through Missouri or do to the monitor burning out, and it seems that the parameters got srewed up. I'm possitive that the parameters were written down but now we cant find them. We cant boot up to run anything. Does anyone have parameters that would work on this lathe.
If anyone can help I sure would appreciate it. Thanks Mike

[valvulin]

Yo tengo backupeados los parametros de un torno TAKISAWA con FANUC 3T, si queres puedo enviarte los parametros por mail.. contactate..

I have backup of the parameters of a wheel TAKISAWA with FANUC 3T, I you can send the parameters for mail .. contact me.. Sorry my english is bad..

[email protected]
my name is Fernando

[hammerdown]

Hello all. This is my first post and I really need help. One of our cnc lathes is a 1985 Takisawa lathe with a fanuc 3 T controller. Our monitor went out and I think iwe must have got a surge, either from the storms that just came through Missouri or do to the monitor burning out, and it seems that the parameters got srewed up. I'm possitive that the parameters were written down but now we cant find them. We cant boot up to run anything. Does anyone have parameters that would work on this lathe.
If anyone can help I sure would appreciate it. Thanks Mike

I also have a Takisawa lathe with Fanuc 3T and I have all the parameters except the pc parameters that configure the turret. Were you succesfull in restoring your machine? if so, can you pass the pc parameters on to me? I need from number 160 on up. I will gladly pay postage or you can e-mail or fax them to me.
Thank you, Hal in Arizona

[hammerdown]

Yo tengo backupeados los parametros de un torno TAKISAWA con FANUC 3T, si queres puedo enviarte los parametros por mail.. contactate..

I have backup of the parameters of a wheel TAKISAWA with FANUC 3T, I you can send the parameters for mail .. contact me.. Sorry my english is bad..

[email protected]
my name is Fernando

Fernando:
I also have a Takisawa lathe with Fanuc 3T and I have all the parameters except the pc parameters that configure the turret. can you pass the pc parameters on to me? I need from parameter number 160 on up. I will gladly pay postage or you can e-mail or fax them to me.
Thank you, Hal in Arizona

[rrbird76]

Hi guys
Yes I have them all now and would be glad to post them.
Current Diagnostic Perimeters
0 01011000
1 00000000
2 00001010
3 00000000
4 11010100
5 00000000
6 10100000
7 00000000
8 00000000
9 00000000
10 00000000
11 00000000
12 00000000
13 00000000
14 00000000
15 00000000
16 00000000
17 10100000
18 00100000
19 00001000
20 11000000
21 00010101
22 01000000
23 00000000
24 11111111
25 11111111
26 00000000
27 00000111
28 01110111
29 00000001


160 00010000
162 00010000
164 00011010
166 01001000
168 00001000
170 00001000
172 00010000
208 00000010
209 00101000
210 00010100
211 00001010
212 01000000
213 00000110
214 00001010
215 00011110
216 00000010
217 01000000
218 00000011
220 00001010
221 00001010
223 00000001
I am having problems enetring them back into the machine. Any suggestions? Thanks