Here are some pictures my wife took at a IMAC event over the weekend I attended-
Here are some pictures my wife took at a IMAC event over the weekend I attended-
Paul,
Were is the great looking grass strip located?
Phil
Milford, PA
dang cool
Two more Fun-Fly's for this year left for me, I'll try to post some video.
Wow - do a 3 or 4x scale up and go for a ride!
Those are nice looking machines!
Experience is the BEST Teacher. Is that why it usually arrives in a shower of sparks, flash of light, loud bang, a cloud of smoke, AND -- a BILL to pay? You usually get it -- just after you need it.
What your're seeing is 35 and 40% aircraft my plane is a 33%.
Let me know when and were Paul I would like to go to a Fun fly like that.Originally Posted by CNCadmin
Nice plans paul, hop you had fun.
Welcome back
(Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)
Cadcam
Software and hardware sales, contract Programming and Consultant , Cad-Cam Instructor .
Thanks, yes I had lots of fun, it was a bit windy, but that just made flying more fun.
Do you know Tony Stillman at radio south? I believe he still flys those big boys.
(Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)
Nice going Paul, great looking airplane.
Marv
Hey reading my post, am I missing an "E" key or what.
Glad you had a good time. that is what it's all about "FUN" :banana:
(Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)
Cadcam
Software and hardware sales, contract Programming and Consultant , Cad-Cam Instructor .