So it lost all my post processors, and i fixed that but now it wont let me save drawings in .txt format.
What the hell is it always this buggy?I have been pouring through my manuals but i have no idea whats wrong.
So it lost all my post processors, and i fixed that but now it wont let me save drawings in .txt format.
What the hell is it always this buggy?I have been pouring through my manuals but i have no idea whats wrong.
I don't give a damn if you don't like me, cause i don't like you cause you are not like me.
Drawings can not be saved in txt format. The posted NC cam files can be. Is this what you need to do?
If so then you can change the default setting in the NC window setup.
Yes i should have been clearer, i am trying to save my nc files like i always have and all of a sudden it wont do it.
I don't give a damn if you don't like me, cause i don't like you cause you are not like me.
It looks like bobcad cam actually lost my liscense? I am getting frustrated with this software.
I don't give a damn if you don't like me, cause i don't like you cause you are not like me.
Toby D.
"Imagination and Memory are but one thing, but for divers considerations have divers names"
Schwarzwald
(Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)
www.refractotech.com