Sinkoumn's JoesCNC2006 Build Log
Hi all, I figured since there haven't been too many new build logs put up I'd follow my build progress on the forum to share my experience building Joes CNC 2006.
I have been working on it for two days now, so here is where I am at with the build:
I had put an ad on craigslist to see if anyone in my area would cut out the parts - to my surprise I had about 8 offers to cut the parts. I wanted to order the parts through Joe, but do to limited funds at the time I decided to go with the local guy.
After all the nesting of parts here is what I ended up with, I saved the Rhino file to be opened in Adobe Illustrator and color coded the nested files for pocket depth cuts:
Pic 1: 8'x4' sheet - .5" MDF (sheet 1)
Pic 2: 8'x4' sheet - .5" MDF (Sheet 2)
Pic 3: 2'x2' sheet - .75" MDF
Pic 4: 2'x2' sheet - .75" HDPE
Pic 5: 1'x1' sheet - .5" HDPE
(Note, I left out the sheets that didn't have any pocketing)
www.NeustonBoards.com
Mike