[FLCNC]

Hope this is the place to post>
Who has a recomendation for software on a small home made
CNC machine??

[dertsap]

it may be worth looking here http://cnc4free.org/
ive payed for his tutorials and found it pretty incredible what a guy can create , best of all the softwares are all free ,
when it comes to hobby use i honestly don t think a guy would need much more than the free softwares that are available

[cocodet]

Hope this is the place to post>
Who has a recomendation for software on a small home made
CNC machine??

What are you looking for?

for post-processor I use mach3 which is quite cheap and does the job properly http://www.machsupport.com/artsoft/index/index.htm.

[FLCNC]

I tried the Mach3 software download to see how it works and looks like it's not an easy program to use. I have tried Kcam and it is a little easier but not as powerful. Thanks for the input. Mark

[Electronics Man]

Has anyone used KCAM with the HobbyCNC EZ Driver Board Kit? I need a little guidance on how to set up the board and how to set the current adjustment for my steppers.

[saimgee123]

As i know cnc4free.org is best for this purpose and here you can find the complete detail.

[MetalZilla]

Is it a CNC lathe? I have developed a program for the CNC lathe called "Simple Lathe Cam" it may help you out. http://www.webmachinist.net/simplelathecam.html

[Bob Adams]

Hope this is the place to post>
Who has a recomendation for software on a small home made
CNC machine??

Take a look at my website:
www.cad2gcode.com