The screw appears to be in excellent shape but the nut is noisy. Who rebuilds these? Or where can I buy a new Y axis screw and nut online?
Results 1 to 2 of 2
-
04-14-2008, 03:22 PM #1
Registered
- Join Date
- Apr 2005
- Posts
- 1194
KMB yaxis ballscrew and nut..who rebuilds these?
-
04-16-2008, 12:55 PM #2
Registered
- Join Date
- May 2007
- Posts
- 64
Don't know what part of the country you are in. We use Express Ball Screw Repair in Cleveland Tennessee (near Chatanooga) Pete Edwards is the guy to talk to 800-711-2153. We have had four screws / nuts rebuilt by them for our Cinci's and are very satified. There are a lot of places that do this, most bearing houses also provide the service.
Rick
Reply With QuoteSimilar Threads
-
The TRON-CNC design. First rebuilds are finished
By jensn in forum DIY CNC Router Table MachinesReplies: 0Last Post: 10-18-2007, 08:23 AM -
Ballscrew ? Nut?
By pointcloud in forum Mechanical Calculations/Engineering DesignReplies: 6Last Post: 04-26-2007, 06:46 PM -
Another which is better R&P,Ground ballscrew,rolled ballscrew,Acme,beltdrive etc.thre
By lgalla in forum Linear and Rotary MotionReplies: 10Last Post: 01-16-2007, 06:27 PM -
Mazak Vmc Yaxis Problems
By barebonzchop in forum Mazak, Mitsubishi, MazatrolReplies: 0Last Post: 09-07-2006, 02:01 PM -
My new ballscrew
By lt paul in forum Uncategorised MetalWorking MachinesReplies: 1Last Post: 07-24-2004, 05:35 PM
Posting Permissions
