Hi , My name is Max . i;m collecting info and starting to Build a CNC rounter . for mY MDF project ..

First i would LISt my NEEDS -
Cutting Space of 48" x 34 "
Cutting MDF thickness 20-30mm

Basic operation ..
Cutting ODD shape . and letter . as well as engraving of letter and design .
---
what would i need if i want the machine to work .
6-10 hour a day .
-------


This is my basic needs and of cos i hope what i am building will be durable and lasting .

Here is a FEw Site i am looking at for the Package .

http://www.xylotex.com/

http://www.probotix.com/3_axis_stepp...r_driver_kits/

http://www.kelinginc.net/ThreeXCNCPackage.html



xylotex offer one PCB for the 3 Driver .
which i am thinking if it break down or somehow due to my poor understanding
damage it .. i would have to replace the whole PBC ..
but other .. package offer 3 pcs PCB one for eaqch drive .. which if i damage anyone one of then during testing i can replace only the damage one .
i might be wrong - so do correct me and enlighten me
-------------

i see some fancy Stuff like pendant jogger .
which i would be interested , anyone know any seller - for the product and what kinda . setup would i need s.
--------
If you know other site with PAckage Kit -- and you think is A good option to view at please - provide URl thanks you

---------
i have been loooking at kelinginc stuff and a few other package seller out there for the Motor and drive package .. but all this technical term is confusing me ..

------
So to start off

the Stepper Motor . - what would one suggest .. Servo or steeper -
what kinda Stepper size would i need.
the price diffrent of NEMA 23 seen much cheaper .. would it be enough for my task ..?
------------------
IF NEMA 23 is the choice . what Oz would be better . 270oz or 425oz ? the price different is not much .

----------------------
WHat is a Breakout Board . -????
-----------------
Can i use USB .. or upgarde in future if i need too .
-----------
chances is i would run my System on a Cheap old laptop .running on WIN xp .
---------------------------


I am also having problem to find a LEad screw for my cutting size --
can someone point be a direction ?
-------------------------------
more or less i should have no problem making the TAble for cutting .
but the technial aspect on the steeper and computer is a kinda confusing for me .
--------------------
what would be a good software to use - i am good at illustrator on adobe , but not sure if . 3d is the same ..
------------------
if you have package which you think is good or better please kindly suggest and put your reason why .
-----------------

well i am looking at about 300-500 usd for the 3 axis package . to start off .
and kelinginc seem to be offering alot of parts .
--------------------

Spindle
------
base on cutting MDF that is 20-30mm thick .
what would be a stable good spindle - hope to keep price below $200
with lot of option to upgrade or after market parts . some spindle might be good but the drill bits and parts is expensive - i am guessing .
do suggestion . what is good .or what is best for my project .
------

i am so new to al this please advice , suggestion correct me if am wrong in anyway .