Hi
Thanks for the reply. I have a Bridgeport machine with Fanuc oi-mc control. Every time when I power ON the machine the system goes to "SYSTEM MONITOR MAIN MENU" and an alarm blinks "ROM PARITY ERROR:NC BASIC"
I don't know how this file erased from the system accidentally? But when I go for the backup I found there are two files still in the system
SRAM1_0A.FDB
SRAM1_0B.FDB
Please help to recover the system so that i can start the machine. Please see the attached picture for the details of the control and software version.
Thank you very much
Pictures of "SYSTEM DATA CHECK"
omg ,no system files, i think someone push the flash rom initalisation.
you need complete files from system
the problem you will get on the option file and fater that you will need to certificate the controller.
is better to involved Fanuc if you want a wasy and clean fix
i do not know about your sram,hope is ok,if not you will need the cnc paramaters and the pmc paramters to load .
good luck
PS:You should say to us what you did before or what other did.
Ohh. What to do now? How can I get system files?
Please help me
Hello:
So you lost all software files. You need more than 10 files. Do you have the DATA SHEET of the FANUC control? In the DATA sheet we can find what Main Pcb the control has, and all of the PCB inside the control.
Make a copy of the SRAM files.
Maybe you have a Hardware problem, that is why you cannot see any "ROM files".
Do you know what happened to the machine? It is very difficult for someone to erase the files unless they know how to do it. This is why I am thinking you have a hardware problem.
Regards
AlexFanuc
Dear alexfanuc and zavateandu
Thank you for your reply. Actually, my brother got some alarm and restart the machine by pressing (P+Q+CANCEL) keys. He is saying that after restart this screen comes out and files are erased.
Now, what do you think? How can I fix this?
Can anybody send me the system files? while two backup files (SRAM1_0A.FDB) and (SRAM1_0B.FDB) are still in the memory!!!
Thanks