I thought I will post my build diary here in other CNC related hobby
you can see my full build diary at [DIY DTG] Epson Pro 3800 - T-Shirt Forums
or
Through my youtube channel at http://www.youtube.com/user/purikurashop
I thought I will post my build diary here in other CNC related hobby
you can see my full build diary at [DIY DTG] Epson Pro 3800 - T-Shirt Forums
or
Through my youtube channel at http://www.youtube.com/user/purikurashop
Check out my latest video here
[ame=http://www.youtube.com/watch?v=KR7sptNqetA]Second Video Printing Result DTG with Servo Motor and STM32F4 - YouTube[/ame]
I am done with my project so far and I will make some improvements in the next following days
That is very cool...
One question - are you using the floating point capabilities of the STM32F4 Discovery in your build, or are you just using that board because it is a powerful and inexpensive micro?
(I have a few of those boards, but have not yet gotten around to hooking them up or playing with them.)
Thank you
I am still not using the floating point because I am not working with tft lcd animation and short off. Yes I am using STM32F4 simple just this board is extraordinary, inexpensive, many GPIOs means I can add many features to my projects, powerful 168MHz core speed with 100MHz bus speed which is more than enough for me to get a real time quadrature encoder data, and I have been working with STM32 since the F2 version came out so I am pretty familiar with this board.
If anyone want to support my project at Crowd Fund Raiser - Discovery-Jet Direct To Garment I don't know if it is against forum guidelines every penny does count.
I setup a new website for my Discovery-Jet Crowd Fund Raiser, everything still in beta mode but the support system is working by now.