I have a Harrison 600 Group ALPHA 400T Lathe here. I need to find out the part number and possibly where I can get a bearing not listed in the manual I have here. The lathe we have was manufactured in 2001 Now on page 7.4.4 of the manual there is a drawing of the Clutch Mounting Sub-Assembly, not listed here are the two bearing that go into the bearing support bracket or the clutch carrier bracket. I need to find out as much as I can about these bearings. Any help would be greatly appreciated.
Results 1 to 3 of 3
-
04-21-2008, 09:52 PM #1
Registered
- Join Date
- Apr 2008
- Posts
- 2
Trying to find a part for a Harrison Alpha 400t CNC Lathe
-
04-22-2008, 07:53 PM #2
Registered
- Join Date
- Jan 2008
- Posts
- 136
try emailing the 600 group in england, they own harrison. or email harrison directly.
-
04-23-2008, 01:10 PM #3
Registered
- Join Date
- Apr 2008
- Posts
- 2
I did that and the only problem is Harrison doesnt want to give out the number of the bearing, they want to sell and entire clutch assembly. Thats why i am looking for bearing numbers.
Reply With QuoteSimilar Threads
-
Schaublin Lathe Bosch alpha parameters
By Spinner560 in forum Controller & Computer SolutionsReplies: 16Last Post: 04-30-2019, 11:27 PM -
Harrison Lathe
By bugzpulverizer in forum CNC (Mill / Lathe) Control Software (NC)Replies: 2Last Post: 05-19-2009, 11:01 AM -
Harrison Alpha 400 HELP!!!!!
By themachinest in forum Community Club HouseReplies: 4Last Post: 02-26-2009, 05:44 PM -
Harrison VS450 CNC flat bed lathe
By Fudd in forum Uncategorised MetalWorking MachinesReplies: 1Last Post: 11-14-2006, 01:31 PM
Posting Permissions
