This video was taken at one of our local customer's shop.
Machine used: Haas VF2-SS
Material: 6061-T6 aluminum 1.5" x 5.0" x 5.2"
Cutting tools used:
3" Walter 4 insert face mill, 6000 RPM, 125-200 ipm feed.
3/4" 3 flute hanita end mill, 12000 RPM, 200-225 ipm feed.
1/4" 2 flute chamfer mill, 12000 RPM, 250 ipm feed.
6" vise with Talon Grip Systems TK6-A jaws holding on to .060" of material.
Run time 1:26 minutes

[ame="http://www.youtube.com/watch?v=ZwGu-JSdol4"]YouTube - Star Part Demo[/ame]

www.talongripsystems.com