Hi all,
We have a Deckel Maho DMC-70V with a Franze Kessler spindle motor type: 100.AL.4.FOS whose bearings are on the way out.
We are considering rebuilding it ourselves (cost of changeover from DMG is horrendous). We therefore need to get specs for this motor such as preloading values etc. Drawings of the motor would be marvelous if anyone has them. Any other advice would be greatly appreciated. Yes we know these are complex beasties but have some experience in the area but not with Kessler motors.
Any advice from the collected wisdom out there would be very welcome.
Thanks in advance
Adrenal