[SGARCIAM]

This is machine is a retrofit ?

[toolm8kr]

yep. 1988

[SGARCIAM]

Send me a P.M.

[Namnp2007]

Hi all.
I have same trouble with my Maruzen CNC machine, with Fanuc OMA controller: It's nothing happen when I pusshed Cycle Start knob in Auto Mode, even G127.5=1( But I can Push or Read any program or parameter in Edit Mode). Do any one knew what's the reason and how to fix it? Thanks so much.
Nam.

[jeeybee]

on my Fanuc OM i just change parramater number 480 to

Drip on - 11000101
Drip off - 11000001

Just to clarify:
Diagnostic 480, at least on my machine.
See picture of how it look here when on.

[toranacar]

Just to clarify:
Diagnostic 480, at least on my machine.
See picture of how it look here when on.

This is really interesting, I have a 1992 Leadwell MCV OP. Fanuc OM. It doesn't have tape mode switch, i will see if this works for me. I want to buy DNC Titan device for drip feed. Anyone use this?