[harm]

Dear members, next month I will buy a cnc machine: Biesse Rover 322
now I need a software to make bedrooms and kitchen. what I exactly need:
a software to make holes exactly to boring i mean put when the self screw will be placed, when to put the hole for shelves etc....

sorry for my bad english

[ger21]

http://www.2020technologies.com/Prod...130&menu_id=52

http://www.planitmanufacturing.com/p...etvision/intro

http://www.cadcode.com/index.php?cat=99

http://www.microvellum.com/

[harm]

thank you sir

how about this software can you tell me plz

http://www.kcdw.com/cabinets.htm

does it work for me
for that type of Biesse Rover 322

[harm]

please if I can make another question,
the machine I am looking to bye works,

Control of the machine and accessories:
Control and program system CNI NC 481 with the following features : floppy disk reader and keyboard.

If anybody can explain to me what is CNI NC 481 and tell the software ger21 recommended to me does work or read the Biesse rover 322

thank you all

harm
Kosova

[battwell]

i have written postprocessor for biesse 481 controllers for both bobcad and alphacam. i also have a program that converts the file ie text, tap etc into the correct format and writes direct to floppy from a modern windows xp pc. contact me for more details

[swax]

Dear members, next month I will buy a cnc machine: Biesse Rover 322
now I need a software to make bedrooms and kitchen. what I exactly need:
a software to make holes exactly to boring i mean put when the self screw will be placed, when to put the hole for shelves etc....

sorry for my bad english

Hallo who is producer this system? CNI NC 481. I have this machine too.But i have some problems.
With system and G-codes.I need user manual. Or postprocessor for NC481 controllers.

[battwell]

what problem? what are you trying to make?

[MarkT]

For boring (and a lot of routing)..., the onboard parametric conversational programming embedded in this control is more than adequate and really can help someone contain costs, especially initially. I also probably have a .pdf of a programming manual should anyone need it please email me at [email protected]

Mark T.
www.cnccustomservices.com