[Jfrahm]

ANY ONE KNOW WERE TO GET RETENTION KNOBS FOR A KIRA KV-3MC MILL ,THEY ARE BT 35 HOLDERS WITH WITH ODD SIZED RETENTION KNOBS ,10 MM ON HEAD AND 7 MM ON THE SHANK . I FOUND A PLACE ,BUT THEY NEED 10 WEEKS TO MAKE THEM AND 35 BUCKS A POP I COULD HANDLE THE PRICE BUT LEAD TIME IS KILLING ME!

[davereagan]

Try page 417 in this catalog:

http://www.kbctools.com/usa/main.cfm

They have two that are for BT35 with M12 threads. The first one, P/N 7-081-B35102, has the 7mm and 10mm dimensions you need and the price is $15.95
If that doesn't work out, I would email the sellers on Ebay who sell the more common CAT40 and BT40 knobs. I suspect they could beat the price or delivery or maybe both, considering they sell regulanobs for nearly half of the catalogs. Maybe they have some or have made them before.

Dave

[SKEETO]

Try here also, www.maritool.com, Sorry: I was mistaken, they don't have it.

[Kool Parts]

I would say MariTool also. If these are truly hard to get you might still contact MariTool to find out what it would take to make something not in stock.