Finally finished
- Purchased a 4" 4-Jaw Chuck
- Purchased a 7/8" Drill bit
- Purchased a 29/32 Chucking Reamer - al liitle larger than the 7/8" drill bit
- Purchase a 3/4" Drill chuck
- Had to cut the Reamer form 10" to 8 " so it would fit om my 14" lathe
finally Completed my cylinders. The engine is complete. I will be putting a video on my forurmrant.com steam engine and I.C site and also some pics and plans on how to make a Boiler.
gdl357