Hey gang, I'm searching out some BT30 holders (need face mill and a few other things) and seem to find every thing listing as 12mm pull stud threads. I've checked mine down stairs and its a 1/2x13 tpi.
I have a Kurt Power draw bar on mine. Can anyone else confirm DB threads?
thanks all
Owen
Results 1 to 3 of 3
-
06-04-2008, 01:07 AM #1
Registered
- Join Date
- Jan 2007
- Posts
- 129
Draw Bar TPI? V2XT with Kurt power DB
9 1/2
B.C.I.T. Machinist CNC
-
06-04-2008, 02:21 PM #2
Moderator
- Join Date
- Nov 2004
- Posts
- 3028
only one type spindle on the V2XT accepted a power draw bar. The Erickson QC-30 with a 1/2 X 13 thread.
George(Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)
-
06-05-2008, 05:49 AM #3
Registered
- Join Date
- Jan 2007
- Posts
- 129
Thanks George. All the holders I'm finding are 12mm .......
9 1/2
B.C.I.T. Machinist CNC
Reply With QuoteSimilar Threads
-
Kurt Power Drawbar on eBay if anyone is interested.
By Edster in forum Bridgeport / Hardinge MillsReplies: 0Last Post: 09-24-2007, 08:30 PM -
Interact Power Draw Bar - exploded view?
By swarf_rat in forum Bridgeport / Hardinge MillsReplies: 0Last Post: 03-11-2007, 11:45 PM -
Which Kurt Power drawbar?
By acerocket in forum Bridgeport / Hardinge MillsReplies: 0Last Post: 09-14-2006, 05:02 PM -
Which Kurt Vise to get for CNC
By JMFabrications in forum Work Fixtures / Hold-Down SolutionsReplies: 21Last Post: 03-27-2006, 06:07 PM -
V2XT power supply
By Riverside192 in forum Bridgeport / Hardinge MillsReplies: 3Last Post: 06-15-2005, 05:31 AM
Posting Permissions
