Fanuc 14T Robodrill
I'm getting a 1014 APC alarm... usually when pallet is going in or out. Can not find the details and solutions of this in my book.
Any ideas.
Thank you in advance.
George
Fanuc 14T Robodrill
I'm getting a 1014 APC alarm... usually when pallet is going in or out. Can not find the details and solutions of this in my book.
Any ideas.
Thank you in advance.
George
Hello there....
I do not really know the description of the alarm. I could not find it in the book.
But I'll suggest that to the mechanic. I hope I get to talk to the " Fanuc" service man today
Thank you for your help
Cheers
George
George,
This is a alarm from the builder (APC = Automatic pallet change). Try to find in the book from the builder and not from Fanuc.
Daniel
Ohh... OK.
Thank you very much.
I'll look for the records of the pallet.
Cheers.
George
Do any of you guys still have the Robodrill APC (automatic pallet changer) manual handy? Ours has been sitting idle for a few years and we need to rebuild it. Some air lines and fittings are missing/broken off from the move and we can't find the manual. I need a page(s) scan of the air lines to/from the pallet changer.
Thanks
Rich