Does anyone know how to set G30 (reference point return) on a lynx 200L with a fanuc 21i control. I tried changing 1244 parameter but didnt work. Maybe I'm doing something wrong. I appreciate any input.
thankx
Does anyone know how to set G30 (reference point return) on a lynx 200L with a fanuc 21i control. I tried changing 1244 parameter but didnt work. Maybe I'm doing something wrong. I appreciate any input.
thankx
1240 is 1st zero (G28)
1241 is 2nd zero (G30 or G30 P2)
1242 is 3rd zero (G30 P3)
1243 is 4th zero (G30 P4)
don't know what 1244 is.
all values are in MM
I'm sure 1244 is not correct.I knew it was some where in that vicinity.Thanks, Ill try this and get back.
thanks again for your help.