I need some help transfering files from my control to my laptop. Any help would be greatly appreciated.
I need some help transfering files from my control to my laptop. Any help would be greatly appreciated.
hi
easy way is moving over the Disk Drive.
Most OSP 5020 (M or L) don't have a floppy drive. Those that do use a non IBM/DOS format so they can not be read by a PC without special software to mount the drive volume.
With the proper serial cable you can "punch" the program to "CN0:" (if I recall correctly.) Procomm for DOS or Preditor DNC can handle the file transfer.
here is the cable set up to transfer files through the cno: port
any mechanical or electrical device that transmits or modifies energy to perform or assist in the performance of human tasks