Hi everybody;
I'm thinking of buying an 100W chinese laser engraver, but i am curios about if i will be able to cut 20mm acrylic with this machine or not? and how speed i can cut?
Thanks now...
Hi everybody;
I'm thinking of buying an 100W chinese laser engraver, but i am curios about if i will be able to cut 20mm acrylic with this machine or not? and how speed i can cut?
Thanks now...
i could cut 1 cm acrylic with 80watt laser by one pass.
i use speed 1.5 power 95
maybe if want to cut 2 cm, i could use two pass.
with lasers-edge 60W machine, you can cut acrylic as deep as 3/4" and 1" on 80W,
frank
I cut 25 mm clear acrylic by one pass.
I use speed 5cm/min and power 80%
Laser mashine JHF Vista LE1200 80W
I cut 10 mm acrylic
2 mm/s 65 % power of 80W laser
higher power of cutting can increase speed, but not very much.
I cut 20mm acrylic by two pass.If you want to obtain good quality of edge,the cutting can not be too fast.
If you want to cut acrylic more then 10 mm,the power is not so necessary as a time.
Maybe power more then 200 W can make it very quickly,who knows...
Grzegorz
WK Laser LC1280 80W