586,100 active members*
2,581 visitors online*
Register for free
Login

Thread: Fanuc Series Connector

Results 1 to 4 of 4
  1. 06-18-2008, 07:58 PM #1
    Lacky
    Lacky is offline Registered
    Join Date
    Jun 2008
    Posts
    2

    Fanuc Series Connector

    Hello all,

    I have a very stupid question. I am looking for info on an encoder connector that plugs into main controller of a FANUC Series 18T. I have a busted one and I either need one that I can solder or pigtail into. Any help would be appreciated.

    It is a 20pin rectangular molded connector
    Reply With Quote Reply With Quote
  2. 06-18-2008, 08:29 PM #2
    Al_The_Man's Avatar
    Al_The_Man
    Al_The_Man is offline Community Moderator
    Join Date
    Dec 2003
    Posts
    24221
    You need a 20pin Honda Connector, you need to specify male or female.
    There are not many suppliers left for these.
    You could try Fanuc or Mitsubishi in Chicago.
    All the ones I have are crimp-on.
    Try the ebay seller Machinre he strips CNC machines for parts re-sale, he might help.
    I know the 16 used Honda, I am guessing the 18 did also.
    Al.
    CNC, Mechatronics Integration and Custom Machine Design

    “Logic will get you from A to B. Imagination will take you everywhere.”
    Albert E.
    Reply With Quote Reply With Quote
  3. 06-18-2008, 10:53 PM #3
    fanuservicetech
    fanuservicetech is offline Registered
    Join Date
    Jan 2006
    Posts
    121
    You can identify the connector you need on this website.
    http://www.hondaconnectors.com/prodI...20MRH%20Series
    Reply With Quote Reply With Quote
  4. 06-19-2008, 12:58 AM #4
    Lacky
    Lacky is offline Registered
    Join Date
    Jun 2008
    Posts
    2

    Thanks

    I really appreciate the help. FYI the connector that I need is a Honda PCR-E20FS. Thanks again
    Reply With Quote Reply With Quote
« Previous Thread | Next Thread »

Similar Threads

  1. GE FANUC SERIES 15M
    By rajesh_1355 in forum Fanuc
    Replies: 1
    Last Post: 06-10-2008, 11:59 PM
  2. Ask for Fanuc 10M/T DI/DO connector signals
    By Jung in forum Fanuc
    Replies: 2
    Last Post: 12-27-2007, 03:59 AM
  3. Need Help With a Fanuc Series 5
    By RGeo in forum CNC (Mill / Lathe) Control Software (NC)
    Replies: 0
    Last Post: 05-30-2007, 03:11 AM
  4. Fanuc Series 18T
    By jorgehrr in forum G-Code Programing
    Replies: 22
    Last Post: 02-23-2007, 11:21 PM
  5. Fanuc Series 10
    By kayleesdad in forum Fanuc
    Replies: 22
    Last Post: 05-09-2005, 08:30 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules