a good CNC foam cutter machine for cuting foam wings?
a good CNC foam cutter machine for cuting foam wings?
Hi,
Here is what I think is a well thought out and executed wire cutter. Including instructions on how to make it:
http://www.8linx.com/cnc/cnc.htm
Chris
More Links-
LiftZone article:
http://rcgroups.com/links/index.php?...at=240&id=4103
Ready assembled machine:
http://www.foamlinx.com/
Four axis controller. In FrenchI haven't tried it)
http://www.teaser.fr/~abrea/cncnet/e...2001/mmx.phtml
Cheers,
Chris
Hi CNCadmin,
l bought one of the complete kits from Tal at foamlinx.com. Spent a couple of evenings putting it together and works well straight out of the box.
Still learning the software and trying to increase the speed of the cuts but would recommend it, if you haven't time to put one together yourself.
Here's a couple of extra links
www.cenece.com (Spanish site you may need to translate it)
http://www.hobbycnc.com/exppackage.htm
http://www.het-holland.nl/
http://www.modelltechnik-jung.de/cnc/styro1.htm
Cheers
Fran
Hi
I'm running a FoamLinx.
Foam Linx
With the Muller software, and trying out Foam Works
2 wrongs don't make a right
But 2 Wrights makes a Airplane
Kevin Matney
www.Matneymodels.com
734 - 848 - 8195
"IN GOD WE 'TRUST "
(Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)