Bob,
V15 and V16 are the same in this respect. They include both solid model and wire frame 3D simulation and basic lathe and pocket roughing canned cycles. If you're thinking of our CAD/CAM product Advanced System 3000 it does require an upgrade from Level-1 to Level-5 to get full mill/lathe roughing and a higher end solids graphic simulator than what the CNC Controller gives you. This has much more control over the simulation process such as light sources, part slicing, dimension measuring and cutter animation super imposed on imported STL files.
Tech Support
CamSoft Corp.
951-674-8100
[email protected]
(Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)