[rhundl]

I would like to get a quote on vacuum forming some parts I can fax over some drawings to whomever is interested...

A basic description is:

A pc. 4" x 4" x 1" tall thin wall. It is going to have about 25 1/4 x .375 dp bores. Not really bores but cup-like shapes in it.

I dont have a clue what kind of quantity you need to justify setup and molds so fill me in here.

What is a minimum charge, number of pcs.,ect......

I would maybe start with 1000 pcs. and who knows from there.

[Mike Stevenson]

http://www.thomasnet.com/nsearch.htm...sec=prodsearch

[dpryor]

We would be very interested in looking at your thermoforming project. We thermoform parts as small as a 3" diameter cup to as large as a 84" long cover. Our fax number is 330-633-9926. If you could include your contact information and any details of the project either on the fax or in an email, it would be helpful.

[rhundl]

I will do. I am currently working on a drawing

[johnd]

We would be interested in quoting. Please send drawings and information to [email protected]
Thank You
JohnD