OK I have my DT up and running pretty smoothly now. I have been cutting out some pretty simple shapes to learn with. I have loads of BMP files I am converting over and cutting out. Question is, where can I find some good letters and numbers to make signs and such with? Also how do I insert and curve my text around circles and such or is this something I need to wait until I get training in WeCim for? Any help or tips is much appreciated.
Steven
Results 1 to 4 of 4
-
06-24-2008, 03:03 AM #1
Registered
- Join Date
- Jun 2008
- Posts
- 9
Letters,Numbers and inserting and curving text
-
06-26-2008, 01:12 AM #2
Registered
- Join Date
- Jul 2007
- Posts
- 54
if you can wait they will go over this during your we cim training..
probably going to be easier when they explain it..
I wish i could help but haven't gotten to use my machine since i got it set up..
good luck
chris
-
06-26-2008, 02:00 AM #3
Registered
- Join Date
- Dec 2007
- Posts
- 33
Vectric has the answer
Get VcarvePro and it does all that for you.....
-
06-26-2008, 10:51 PM #4
Registered
- Join Date
- Jun 2008
- Posts
- 9
Thanks for the info. That will come in very handy, since we are anticipating adding a Shopbot in the next year as well.
Reply With QuoteSimilar Threads
-
Stop inserting M3
By Big John T in forum SheetCamReplies: 1Last Post: 05-11-2008, 09:35 PM -
Inserting Brackets () on 18-T Control
By SheldonB in forum FanucReplies: 4Last Post: 06-28-2007, 07:39 PM -
TCC v3 - keeps inserting G28 - why
By phil burman in forum Uncategorised CAM DiscussionReplies: 1Last Post: 06-26-2006, 05:29 AM -
Inserting an excell spreadsheet
By smoa1980 in forum MastercamReplies: 10Last Post: 05-14-2006, 05:11 AM
Posting Permissions
